FLAT SHEET MEMBRANE CASTING MACHINE WITH HEATING FACILITY
PARAMETER
DESCRIPTION
MOC of the Machine SS304
MOC of the Casting plate SS304 Thickness of the Casting plate 20mm Min Type of movement mechanism Belt driven with timer pulley
MOC of movement belt PU
Drive Motor with gear reduction
Input 230 VAC,
50 Hz,
single phase.
HIGH PRESSURE STIRRED CELL
PARAMETER
DESCRIPTION
MOC SS 316L
Diameter of the membrane 47 mm
Active membrane area 1734 mm2 Processing volume 0 – 300 mL Holdup volume 1 ml
Pressure of operating 69 Bar max with High pressure clamps pH range 1-14
(check membrane compatibility)
Cell body SS 316L
O-rings Buna-N Gaskets Buna-N
Stir bar ( Magnetic Stirrer) PTFE
Porous support disc Sintered SS plate
CONTACT ANGLE MEASUREMENT
CONTACT ANGLE SKID
ITEM DESCRIPTION QTY
X Y – Movement Horizontal 1
slide with adjustment facility
Z – Movement vertical slide
with adjustment facility for 1
height movement to position
and focus droplet
Platform to hold droplet 1
Image Sensor with USB Cable 1
Syringe for manually dispensing
droplet of solution on X-Y platform 1
Standard software to measure
contact angle using the captured image 1
PARAMETER DESCRIPTION Image sensor 2MP ( by software ) Type CMOS image sensor Controller High speed DSP Focus range 0-40mm
Video capture resolution 0.3M
Still image
capture resolution 640 x 480
Built-in 6 LEDs Adjustable lightness Frame rate 30 fps
Power supply USB port ( 5V DC ) USB 2.0 and USB 1.1 compatible Operation system Windows XP, Vista, 7
LOW PRESSURE STIRRED CELL
PARAMETER
DESCRIPTION
Top and Bottom plate SS 316 Cylinder SS 316 Stirring bar grip and coating 17.3 cm2 Pressure 15-20 bars
O ring Nitrile
Pressure tube Nylon
Funnel PP
Max process volume 75 mL
Min process volume 2.5 mL
Hold up volume 0.3 mL
Filter size 47 mm dia Filter area 15 cm2
TECHPoro CAPILLARY FLOW POROMETER
PARAMETER TECH Poro - AL - 500 TECH Poro - LL - 1000
Standard ASTM - F - 316 - 03 ASTM - F - 316 - 03
Measuring principle Capillary flow porometry Capillary flow porometry
Air /Liquid Liquid/Liquid
Pore size (min) 50 KDa 5 KDa
Pore size (max) 2000 KDa 400 KDa
Pressure range 500 psi max 500 psi max
Sample size standard 6 mm on 25 mm dia 6 mm on 25 mm dia
MOC of cell SS 316 SS 316
Pressure sensors Provided Provided
Pressure regulator Provided Provided
Flow meter Provided -
Weighing balance - Provided
Clamping arrangement Manual - Standard Manual - Standard
Automatic (optional) Automatic (optional)
Wetting liquid TECHflo (50 mL included) TECHflo (50 mL included)
Software Included (max pore size, mean Included (max pore size,mean
pore size,pore distribution) pore size, pore distribution)
System requirement RAM 4 GB or RAM 4 GB or
(customer scope) higher Windows 8 or higher higher Windows 8 or higher